• Control unit for a smart home.
• It is used to connect and control smart devices in the home remotely (cameras, switches, sensors, smart bulbs, etc.)
• Turn off the heating when you return from work / turn off all devices when you leave the house / get notified of unusual events, etc.
• Control via the Tuya Smart app (QR code in gallery).
  
• The ZigBee Smart Gateway is compatible with Android 5.0 and iOS 10.0 or later.
• Voice Control Support - Google Assistant or Amazon Alexa.
• Connection: Wi-Fi (2,4 GHz).
• Protocol: ZigBee 3.0.
• Wireless transmission range up to 30 m.
• Degree of protection: IP21.
• Power supply: 5V - micro USB.

Installation:

• Download the Tuya Smart app from Google Play (for Android) or AppStore (for iOS).
• Turn it on and follow the instructions in the app.
• You can also install the app by scanning the QR code in the gallery.
• After installing the Tuya Smart app, start it and connect it to the ZigBee gateway:
• 1. Click on the "+" button in the upper right corner.
• 2. Search for "Gateway control" and select "Gateway zigbee" in the device list.
• 3. Select the Wi-Fi network, enter the password and click the "next" button.
• 4. Check that the blue light on the front of the gate flashes quickly.
• 5. Wait a few seconds until the process reaches 100%, which means that the gateway has been added.

When connecting the gateway, the phone and the gateway should be within the same 2.4GHz Wi-Fi network. If a problem occurs, press and hold the RESET button for about 5 seconds to reset the gate. Then repeat the above steps.