• Product description

  • Arduino UNO R3 basic module - microcontroller development board based on ATmega328, the board contains 14 digital input/output pins (of which 6 can be used as PWM inputs), 6 analog inputs, 16 MHz crystal, USB connection, power connector, ICSP interface and reset button.
  • It contains everything needed to operate the microcontroller, simply connect it to the computer using a USB cable and you can get started.
  • The set includes:
  • 1x USB cable for the basic module.
  • 1x LCD1602 IIC i2c - I2C display with blue backlight, backlight can be turned off by removing the jumper.
  • 1x RC552 module - 13.56MHz RFID reader with built-in antenna contains all the necessary equipment for easy use, RFID devices can take different forms such as cards, stickers, wristbands or round tags.
  • 1x RFID card white 1 pc RFID badge/keyring blue.
  • 1x joystick Module 20 ideal for gaming applications, bi-directional 10K resistor, 5V voltage, analogue X and Y value can be measured in the range 0 - 5.
  • 1x 4x4 keypad (16 buttons).
  • 1x RTC module - Precision I2C real time clock (RTC) module with integrated temperature compensated crystal oscillator and crystal.
  • 1x arduino water level sensor - water level sensor, a series of parallel holders exposed to the water volume, directly connectable to the Arduino analog input.
  • 1x arduino humidity sensor - the humidistat is an easy to use module that contains everything needed already in its housing, so you only need to connect it with three wires to the basic arduino module.
  • 1x RGB LED module.
  • 1x motor driver module - motor driver module.
  • 1x 5V stepper motor - 28BYJ-48.
  • 1x 1-channel 5V relay module, 250VAC 10A/30VDC 10A.
  • 1x fixed field MB 102 (830 pins).
  • 56x dupont jumper cables.
  • 1x 10 pin Dupont rail (Male to Female).
  • 1x arduino sound sensor - suitable for example for acoustic switched light.
  • 1x IR remote control.
  • 1x 10K potentiometer.
  • 1x digital digits (12×19 mm).
  • 1x 4 digital digits (50×19 mm).
  • 1x 1x 8×8 LED nuts (32×32 mm).
  • 1x micro servo 9G (SG90).
  • 2x buzzer 2pcs of SW-520D shaker sensor.
  • 3x photoresistors.
  • 5x push button with hat.
  • 1x connector for 9V battery.
  • 15x LEDs (5x green, 5x red, 5x yellow).
  • 30x resistance (220R, 10K, 1K).
  • 1x flame indicator.
  • 1x IO 74HC595N.
  • 1x infrared receiver.

  Special coupon offer applies to this product.

  This product is listed in the following categories

  Hobby, House and garden, Power tools, Workshop

• Parameters

• Documents for download

• Ratings and reviews0

• Questions about the product0

Buy

Add to favourites

Product code: HD0290